The Tiger Neo 475W is Jinko’s all-black panel built on N-type TOPCon cells. The all-black finish is the draw for a lot of people: black cells, black frame, black backing, so it sits flat and uniform on the roof instead of showing the silver grid lines and white gaps you get on a standard panel. If the look of your roof matters, this is the version to ask for.
It doesn’t trade performance for the appearance. At 475W it runs 23.77% efficiency, which is high for a residential panel and means you fit more generation into the same roof space. The N-type TOPCon cells hold up better in the heat (temperature coefficient -0.29%/°C) and pull more out of cloudy mornings and late afternoons than older designs, so you get a more even yield across the day and the year.
Where this model stands out is toughness. It’s a dual-glass build with 2.0mm heat-strengthened glass front and back, which seals the cells better and stands up to UV, moisture, and salt air over the long haul. It’s rated to handle front loads up to 6000Pa and rear loads up to 4000Pa, which is at the strong end for a residential panel and worth having on a roof that cops heavy wind or snow. The junction box is IP68 rated against dust and water, and the panel carries Jinko’s anti-PID guarantee plus high salt-mist and ammonia resistance.
Jinko backs it with a 25-year product warranty and a 30-year linear power warranty, with first-year degradation capped at 1% and 0.40% a year after that, leaving 87.4% of rated output guaranteed at 30 years. It’s Clean Energy Council listed, which matters for rebate eligibility in Australia.
Specifications
| Nominal Power (STC) | 475 Wp |
| Module Efficiency | 23.77 % |
| Open Circuit Voltage (Voc) | 36.91 V |
| Short Circuit Current (Isc) | 15.91 A |
| Dimensions | 1,762 × 1,134 × 30 mm |
| Product Warranty | 25 years |